Operate and Configure AX Pro

Operate and Configure AX Pro

On the Mobile Client, you can remotely operate AX Pro. The supported operations include adding area, arming/disarming area, clearing alarm, bypassing zone etc. You can also do remote configurations, such as walk test, DST settings, and device upgrade.

Tap a site to enter site details page, and then select the Device tab. On the device tab, tap an AX Pro security control panel to enter the device details page.

Remotely Operate AX Pro

On the device details page, you can perform the following operations.

Table 1. Operation Description

Operation

Description

Add Area

Select the Area tab, and then tap to add an area.

Stay Arm a Specific Area

Select the Area tab, and then tap to stay arm the area.

Away Arm a Specific Area

Select the Area tab and then tap to away arm the area.

Disarm a Specific Area

Select the Area tab and then tap to disarm the area.

Stay Arm All Areas

Select the Area tab, and then tap at the bottom of the page.

Away Arm All Areas

Select the Area tab, and then tap at the bottom of the page.

Disarm All Areas

Select the Area tab, and then tap at the bottom of the page.

Clear Alarms of All Areas

Select the Area tab, and then tap at the bottom of the page.

Filter Peripheral Device by Area

Select the Device tab, and then tap and select an area to only display the peripheral devices linked to the selected area, or select All to display all the peripheral devices linked to all the areas.

Add Peripheral Device

Select the Device tab, and then tap to add a peripheral device.

Note:

For details about adding device, see Add Device.

Bypass Zone

Select the Device tab, and then select a zone (i.e., detector) and turn on the Bypass switch to bypass the zone.

View Status

Select the Status tab to view the status information of the control panel, including external power supply status, Ethernet network status, Wi-Fi status, etc.

Remotely Configure AX Pro

Tap on the device details page to enter the settings page to remotely configure AX Pro.

Table 2. Configuration Description

Configuration

Description

Walk Test

Walk test is used to test if the detectors can detect target objects in the detection zones.

Tap Project Maintenance > Device Maintenance > Test > Start Walk Test, and then walk in the detection zones, and finally tap End Walk Test to view the test results: the status (normal or abnormal) will be displayed.

Daylight Saving Time

Tap System > Configuration > DST to enter the DST settings page, and then turn on the switch to enable daylight saving time for AX Pro.

Upgrade and Language Switching
Note:

You should have the permission to access the device upgrade functionality. For details about permission settings for AX Pro, see the user manual of the device.

Tap Project Maintenance > Device Upgrade to enter the device upgrade page, and then select language and enter the PIN, and finally tap Upgrade to switch language for AX Pro and upgrade it.

Note:

If you don't have the PIN, you can tap Apply for PIN to apply for it.

Other Configurations

You can do other configurations including user management, system options configuration, linking network cameras, communication settings, etc.

Note:

For details about other AX Pro configurations, see the user manual of the security control panel.

Operate and Configure AX Pro

On the Mobile Client, you can remotely operate AX Pro. The supported operations include adding area, arming/disarming area, clearing alarm, bypassing zone etc. You can also do remote configurations, such as walk test, DST settings, and device upgrade.

Tap a site to enter site details page, and then select the Device tab. On the device tab, tap an AX Pro security control panel to enter the device details page.

Remotely Operate AX Pro

On the device details page, you can perform the following operations.

Table 1. Operation Description

Operation

Description

Add Area

Select the Area tab, and then tap to add an area.

Stay Arm a Specific Area

Select the Area tab, and then tap to stay arm the area.

Away Arm a Specific Area

Select the Area tab and then tap to away arm the area.

Disarm a Specific Area

Select the Area tab and then tap to disarm the area.

Stay Arm All Areas

Select the Area tab, and then tap at the bottom of the page.

Away Arm All Areas

Select the Area tab, and then tap at the bottom of the page.

Disarm All Areas

Select the Area tab, and then tap at the bottom of the page.

Clear Alarms of All Areas

Select the Area tab, and then tap at the bottom of the page.

Filter Peripheral Device by Area

Select the Device tab, and then tap and select an area to only display the peripheral devices linked to the selected area, or select All to display all the peripheral devices linked to all the areas.

Add Peripheral Device

Select the Device tab, and then tap to add a peripheral device.

Note:

For details about adding device, see Add Device.

Bypass Zone

Select the Device tab, and then select a zone (i.e., detector) and turn on the Bypass switch to bypass the zone.

View Status

Select the Status tab to view the status information of the control panel, including external power supply status, Ethernet network status, Wi-Fi status, etc.

Remotely Configure AX Pro

Tap on the device details page to enter the settings page to remotely configure AX Pro.

Table 2. Configuration Description

Configuration

Description

Walk Test

Walk test is used to test if the detectors can detect target objects in the detection zones.

Tap Project Maintenance > Device Maintenance > Test > Start Walk Test, and then walk in the detection zones, and finally tap End Walk Test to view the test results: the status (normal or abnormal) will be displayed.

Daylight Saving Time

Tap System > Configuration > DST to enter the DST settings page, and then turn on the switch to enable daylight saving time for AX Pro.

Upgrade and Language Switching
Note:

You should have the permission to access the device upgrade functionality. For details about permission settings for AX Pro, see the user manual of the device.

Tap Project Maintenance > Device Upgrade to enter the device upgrade page, and then select language and enter the PIN, and finally tap Upgrade to switch language for AX Pro and upgrade it.

Note:

If you don't have the PIN, you can tap Apply for PIN to apply for it.

Other Configurations

You can do other configurations including user management, system options configuration, linking network cameras, communication settings, etc.

Note:

For details about other AX Pro configurations, see the user manual of the security control panel.